image1 image2 image4

Desalination:

 

 

Sea water Intake Pump
Vertical Turbine Pump

BHR / BHQ / BHM / BHK/ BHMa / BHA

Theses pumps are constructed rigidly to ensure vibration free operation. Hydraulic design is being updated with our continuous R&D efforts to meet requirements of higher efficiency and lower submergence, taking care of other parameters such as, high reliability and optimum system design.

Features:
  • Vibration-free performance
  • Low submergence
  • No priming required
  • Dry pit/Wet pit arrangement available
  • Direct drive/Right angle gear drive
  • Impeller pull-out/Non-pull-out
  • Bowl pull-out/Non-pull-out
  • Gland packed / Mechanical seal
  • 50Hz / 60Hz availability

Applications:
  • Water supply Pumps
  • Irrigation Pumps
  • Cooling tower
  • Thermal and Nuclear power plants
  • Steel, Cement industries
  • Refineries
  • Sea water on off-shore platforms
  • Condensate extraction
  • Fire fighting Pumps
  • Flood control
  • Dry Docks

Specification: 
  • Delivery size up to 2200 mm
  • Capacity up to 40,000 m3 /hr
  • Head up to 200 m

Process Water application
SCT Axially Split Case Pumps

These are horizontally axially split casing, single stage, double suction or single suction pumps with horizontal shaft and detachable stuffing box called insert with horizontal axially split volute type. The impeller is accurately balanced by double or single suction. These pumps are used in handling water with slight impurities, petroleum refineries, conditioning and refrigeration system and so on.

Specification: 
  • Delivery size up to 350 mm
  • Capacity up to 4500 m3 /hr
  • Head up to 330 m
  • Temperature (-) 10 °C to 100 °C

Application:
  • Water/Liquids with slight impurities
  • Petroleum refineries
  • Air-conditioning and refrigeration systems
  • Fire protection systems and mining
  • Pump axis horizontal or vertical

Features:
  • Gland packed / Mechanical seal
  • 50HZ / 60 HZ availability

 

 

 

 

 

 

 

 

 

 

Process Water application
DSM / DSMT Axially Split Case Pumps

These pumps are horizontally mounted having axially split casing. They can either be single stage or double stage. These are designed with single suction with a single volute operating at 50 Hz or 60 Hz. These pumps are used in urban water supply, industries, irrigation, air conditioning and so on.

Features: 
  • Gland packed / Mechanical seal
  • 50HZ / 60 HZ availability

Application:
  • Water supply
  • Air-conditioning
  • Power plants
  • Mine drainage
  • Irrigation
  • Fire fighting
 
Specification: 
  • Delivery size up to 150 mm
  • Capacity up to 470 m3 /hr
  • Head up to 180 m
  • Temperature (-) 10 °C to 90 °C

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Process Water application
UP / UPL / UPH / UP (T) Axially Split Case Pumps

These pumps are gland packed and have mechanical seal. These are mainly used in water supply, irrigation, power plants and can have delivery size up to 1100 mm.

Features: 
  • Gland packed / Mechanical seal
  • 50HZ / 60 HZ availability

Application:
  • Water Supply
  • Irrigation
  • Air-conditioning
  • Power plants
  • Paper, Sugar, Textile mills
  • Fire fighting

Specification: 
  • Delivery size up to 1100 mm
  • Capacity up to 20,000 m� /hr
  • Head up to 160 m
  • Temperature (-) 10 °C to 90 °C

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 


 

Process Water application
SHL Solid Handling Pumps

SHM are horizontal non-clog pumps having single stage, single suction with back pull out type design. SHS are vertical non-clog pumps for wet pit applications. The pump section is suspended by a column pipe which also protects the transmission shaft. These pumps can be offered with a column length up to 6.5 m. The impeller is single suction type non-clog, free flow dynamically balanced. For SHM pumps the standard lubrication is grease and the optional one is oil. In case of SHS pumps the lubrication is grease based. These pumps are widely used in paper industries, water carrying gravel and so on.

Features:
  • Solid size up to 105 mm
  • Back pull-out design
  • Gland packed / Mechanical Seal
  • 50 Hz / 60 Hz availability
  • Also available in vertical execution

Applications:
  • Sludge
  • Sewage
  • Power material slurries
  • Sugar factory waste

Specification: 
  • Delivery size up to 200 mm
  • Capacity up to 800 m³/hr
  • Head up to 90 m
  • Temperature (-) 10 °C to 140 °C

Process Water application
SHM Solid Handling Pumps

SHM are horizontal non-clog pumps having single stage, single suction with back pull out type design. SHS are vertical non-clog pumps for wet pit applications. The pump section is suspended by a column pipe which also protects the transmission shaft. These pumps can be offered with a column length up to 6.5 m. The impeller is single suction type non-clog, free flow dynamically balanced. For SHM pumps the standard lubrication is grease and the optional one is oil. In case of SHS pumps the lubrication is grease based. These pumps are widely used in paper industries, water carrying gravel and so on.
Features: 
  • Solid size up to 105 mm
  • Back pull-out design
  • Gland packed / Mechanical Seal
  • 50 Hz / 60 Hz availability
  • Also available in vertical execution

Application:
  • Sludge
  • Sewage
  • Power material slurries
  • Sugar factory waste

Specification: 
  • Delivery size up to 200 mm
  • Capacity up to 800 m³/hr
  • Head up to 90 m
  • Temperature (-) 10 °C to 140 °C

Process Water application
DBL Utility Pump

These pumps find wide applications in water transfer, water supply, irrigation, agriculture, farms, sprinkler, domestic house hold requirements, building and construction and general industry. High efficiency, robust case construction of cast iron, impeller construction of bronze makes these pumps an ideal selection for applications that require easy-to-maintain, reliable, long lasting pumps. Developed by experienced pump engineers of KBL–a leading manufacturer, dealer and distributor of pumps which are designed to perform as per the actual service conditions.

Features: 
  • Back pull-out design
  • Gland Packed / Mechanical Seal
  • 50 Hz / 60 Hz availability

Application:
  • Aqua culture
  • Water supply
  • Irrigation
  • Sugar Industries

Specification: 
  • Delivery size up to 300 mm
  • Capacity up to 1900 m³ /hr
  • Head up to 35 m
  • Temperature (-) 10 °C to 90 °C

 

Process Water application
DB Utility Pump

With a back pull out design these pumps are gland packed or mechanically sealed and are used for air conditioning, booster service, fire fighting and sprinkler system. Delivery size varies from 32 mm to 150 mm.

 

 


Features: 
  • Conforming to DIN 24255
  • Back pull-out design
  • Gland packed / Mechanical seal
  • 50HZ / 60 HZ availability

 

 


Application:
  • Air Conditioning
  • Sprinkler systems
  • Fire fighting
  • Booster service

 

 


Specification: 
  • Delivery size up to 150 mm
  • Capacity up to 550 m³ /hr
  • Head up to 100 m
  • Temperature (-) 10 °C to 100 °C

.



 

 

Process Water application
SCT (Extended)
Axially Split Case Pumps

These are horizontally axially split casing, single stage, double suction or single suction pumps with horizontal shaft and detachable stuffing box called insert with horizontal axially split volute type. The impeller is accurately balanced by double or single suction. These pumps are used in handling water with slight impurities, petroleum refineries, conditioning and refrigeration system and so on


Features: 
  • Gland packed / Mechanical seal
  • 50HZ / 60 HZ availability

Application:
  • Water/Liquids with slight impurities
  • Petroleum refineries
  • Air-conditioning and refrigeration systems
  • Fire protection systems and mining
  • Pump axis horizontal or vertical

Specification: 
  • Delivery size up to 350 mm
  • Capacity up to 4500 m3 /hr
  • Head up to 330 m
  • Temperature (-) 10 °C to 100 °C

.



Process Water application
KOS M Submersible Pumps

iHT pumps are horizontal split case single/double stage centrifugal pumps. All single stage pumps are provided with double suction type impeller. Both single stage/double stage pumps are fitted with DIN 24960 cavity mechanical seal. The impeller/s is/are centrally placed on a sturdy designed shaft and the entire rotating assembly is dynamically balanced to provide a smooth, trouble free, longer and efficient operation.


Features: 
  • Highly efficient - low operation cost
  • Compact size and less floor space
  • Low down time - quickly fixable
  • Low prime mover cost
  • Lowest pumping - project cost
  • Dual Drive to reduce downtime

Application:
  • Suitable for Fire fighting
  • Primary & secondary HVAC application
  • High pressure boosting system
  • Dewatering in mines
  • Cooling tower
  • Recirculation
  • Desalination
  • Water supply
  • Paper plant
  • Steel plant for high pressure injection
  • Sugar plant
  • Industrial utility water application

Specification: 
  • Technical Specifications
    • Delivery Sizes Upto 300 mm
    • Discharge 30-1300 m3 /hr
    • Head 30 to 250 m
    • Speed 2900 rpm
    • Temperature 8 0 C - 90 0C

.

Lime Dosing application
End Suction Pump
KPD, KPD-QF Process Pumps

These pumps are developed for process applications and are generally conforming to API 610. These are gland packed or mechanically sealed. These pumps are ideal for air conditioning, condensate extraction, distilleries, edible oil sugar and textile. Delivery size ranges from 20 mm to 200 mm.


Features: 
  • Conforming to DIN 24256 and ISO 2858
  • Back pull-out design
  • Generally conforming to API 610
  • Gland Packed / Mechanical Seal
  • Also available in vertical execution

Application:
  • Air-Conditioning
  • Condensate Extraction
  • Distilleries
  • Edible Oil, Sugar, Textile and Process Industries
  • Water Treatment Plants

Specification: 
  • Delivery size up to 200 mm
  • Capacity up to 2200 m³ /hr
  • Head up to 150 m
  • Temperature up to (-) 50 °C to 350 °C